'67 Firebird - Getting It Done
|
Dale explains, "All the body seams and gaps were welded or ground to be as equal as possible. Countless hours were spent working and blocking the body to get it mirror-smooth before it was ready for paint. The Firebird was then shot with a PPG DP-48 epoxy primer sealer. The colors, by XOTIC, are a pigmented candy so they really explode in the sunlight. Multiple coats of Rasberee Pearlin' were applied to the upper body and the interior, while Bright White Silver Pearlin' was applied to the lower body. Three coats of clear followed, and wet-sanding with 800-grit was done before the car was sent to Greg Felix for the artwork." View Related Article
|
|
|
|