The real Pennsylvania plate...
The real Pennsylvania plate is a nod to an engine-build series HPP did on the Bird’s 350. Ames Performance was sourced for a new rear bumper.
Jason Korb has accomplished what most of us just talk about—building a Pontiac that is not only quick and pretty, but also able to transport its occupants across any Interstate or down any back road in comfort.
Its built 350 will snap your head back on launch, it gets 22 mpg on the highway, and this Bird handles and stops to its owner’s liking. It also participated in the 2006 Hot Rod Power Tour; 2007 GoodGuys Hershey, where it won the Flowmaster American Thunder Award; 2009 GoodGuys Pocono, where it won Best Ride on Intro Wheels; 2010 All-GM Nationals in Carlisle, where it garnered Best Firebird and was a Celebrity Pick by Dave Anderson, driver of the GeeTo Tiger; 2011 Camaro\Firebird Nationals in Frederrick, Maryland, where it took First Place in its class; and Motorama Harrisburg 2010, and again in 2011—and it’s never been trailered.
Jason confides, “Some judges pick it apart for its road rash, wear, chips, and scratches. Don’t get me wrong—I love looking at a well-done restoration, but in my mind, the urge to go for a 100, 200, or even 1,000-mile drive and not worry about chips and scratches is the best way to enjoy a Firebird.”
The next time you think your...
The next time you think your garage is too small, look at this photo. Here is where this Firebird was built—including the paint. It was painted while it was disassembled.
It’s a healthy attitude for the 43-year-old auto technician. The Firebird, on the other hand, wasn’t always so healthy. When Jason towed it back to his Middletown, Pennsylvania, home in 2005, it was an unfinished father/son project. The Bird was originally Midnight Green with a black Cordova top and green interior. It came with the factory 350 engine, Turbo 350 trans, and 10-bolt rear. Deciding this F-body would be a Korb family father/son project with his son Andrew, Jason set up shop in a small garage and the team got to work on the body and paint, and building the chassis.
Owner Jason Korb says of finding...
Owner Jason Korb says of finding his ’69 Firebird, “Even though it was far from finished when it was rolled out of the garage, I looked at my wife and knew my love for Pontiacs had begun—I just wanted it.” The rear spoiler was on the Bird when Jason purchased it. He added the front spoiler.
Media-blasting stripped the body of its original paint, new rockers and rear quarters were welded in, and the fenders and doors were repaired. Multiple coats of DuPont primer were shot and block-sanded. A coat of DuPont sealer was applied, followed by three coats of single-stage Super White Dupont Centari. Wet-sanding with 1,500- and then 2,000-grit paper followed. 3M buffing HD compound was applied, then Meguiar’s Diamond Cut 2.0; next came a light compounding, a swirl remover, and finally a glaze.
To improve handling and provide a more aggressive stance, Hotchkis 2.00-inch-drop front springs are paired with Hotchkis 1.00-inch-drop rear springs. Polyurethane bushings are used throughout the suspension, KYB gas shocks are at the corners, and a Hotchkis 1.125-inch stabilizer bar is up front.
Jason designed and applied...
Jason designed and applied the custom graphics. He purchased black vinyl from a sign shop, cut the material in strips, and applied it to the Bird. He then designed the graphics on the car using fine-line tape over the vinyl. He carefully cut the shapes out on the body and then applied green pinstriping around them. (He used a heat gun to conform the vinyl to the body contours.)
Intro Billet Retro wheels marry the vintage and modern themes, and measure 17x8 front and 17x10 rear with 4.50-inch and 5.00-inch backspacing respectively. Kumho 225/50R17 Ecsta ASX tires tuck into the front wheelwells, and 255/50R17s fit the rear. The stock 11-inch front disc brakes and 9.5-inch rear drums have been upgraded with Hawk pads and shoes.
At first the 350 was retained in stock form. It was in such great shape at only 60,000 miles that Jason simply resealed it, cleaned it up, and installed it with the Turbo 350 and the stock rear.
The 359ci Pontiac engine features...
The 359ci Pontiac engine features Ram Air Restorations billet pulleys, a K&N air filter, and assorted chrome accoutrements on the outside. But inside it has all it needs to produce 342 hp.
Not long after, a big burnout resulted in a blown engine. Jason says, “Long story short, we were out ’til midnight, out of town, and my wife yelled at me the whole ride home in the tow truck. The driver gave me a break knowing what trouble I was in.”
The hurt powerplant was sent to RaceKrafters in Lancaster, Pennsylvania. Here is where this 350 story may sound a bit familiar to long-time HPP readers, as we covered its buildup in the June through Sept. ’08 issues in a series titled “Little Big Chief,” in which RaceKrafters rebuilt and modified it for serious power without sacrificing driveability. What was originally a 265-horse code-YJ 350 engine put out a stout 342 hp after the buildup. We covered the engine build, and engine and chassis dyno tuning.