Braking to Avoid Braking: Part II
|
Here is the near completed rear disc brake system. We still need to cut and double flare the front to rear line to install the adjustable proportioning valve and connect the flexible differential hose to the front to rear line (I have to find the bracket that I lost). Then of course, we have to bleed the system. However since this is a complete brake rebuild, we still have a lot of lines and the brake booster, master cylinder, and combination valve to deal with. Not to mention the front rotors and calipers. So tune in next issue as our brake story continues. View Related Article
|
|
|
|