1977 Pontiac Trans Am Driver Side Front View
|
As you know from the April 2001 issue, PPG Deltron DBU in Carousel Red was applied to the body over DP 40LF Epoxy primer. A total of four coats of color were sprayed with a 12-minute flash time between each. After wet sanding, five coats of PPG DCC Concept 2042 clear (with DCX 61 High Solids hardener added for a more durable finish) are applied with a 20-minute flash time between each. The paint is then left to harden overnight. The next day the body is wet sanded with 1500 grit paper and then 2000 grit followed by a machine polish with compound. The T/A is then machine polished with Finessing It from 3M and finally a hand glaze will be applied. We're seeing the T/A just after the Finessing It machine polish. View Related Article
|
|