Breathe Deep
|
The intake valve measures 2.25 inches (Can you say Chrysler Hemi?) and the exhaust is 1.800. Don says that the heads will accept up to 2.350 intakes and 1.900 exhaust valves. Valve inclination is 12 degrees as compared to stock heads at 14 degrees. He also warns that with the 1.800 valve in the stock location a minimum of a 4.25-inch bore (4.28 is better) is required so an Indian Adventures block or a hard block filled, overbored stock block will be necessary with these heads. View Related Article
|
|
|
|