Straighter Scoop
|
The '74 GTO shaker hood scoop was connected to both a power source and manifold vacuum. Rather than have separate wires for both, the 12V lead and ground like the Trans Am, the GTO scoop had one plug receiving both as evident by 2 male spade connectors within the grommet. A yellow 12V lead and black ground wire were fit into a single T-shaped female connector, which then plugged into the grommet. Additionally, a vacuum hose running to a manifold vacuum source was connected to the vacuum port on the scoop, which led to the vacuum switch within the scoop housing as shown in the previous photograph. View Related Article
|
|
|
|