1966 Pontiac GTO - Resto Recon
|
A correctly iridite-plated master cylinder cap was installed as were correct zinc-plated shoulder nuts but the cylinder is still black (it should be cast gray and the brake line should be natural) and the hood hinges remain black (they should be zinc phosphate plated). Also the incorrect horn relay remains. The washer reservoir was replaced but it's still not correct. Notice however, the correct wire straps for the positive battery cable on the fenderwell. The washer hose is in the wrong place right now because the clip to hold it at the top of the cowl was on order when the photos were taken. View Related Article
|
|