1966 Pontiac GTO - Resto Recon
|
From this view you can see the correct heater and coolant hoses and assorted factory informational decals. It's not the original battery but at least it's a Delco battery. Proper spring ring cables are in place (but not the battery hold down) as is a correct radiator cap. A new engine wiring harness and the loom holder (which should be engine color) were added at the top of the valve cover. The second part of the throttle cable was left natural and the bracket was painted engine color. A Tri-Power yellow throttle return spring replaced the hardware store spring and 1-Q-66 dated plug wires were installed along with new fasteners.Next time we will take a long look at the body and interior. Remember we were on a budget and the GTO will not get everything it needs to be a gold-standard Goat. But the overall results will be very pleasing so watch as our puppy-mill car with a few dollars becomes a beautiful '66 GTO worthy of any show or cruise. View Related Article
|
|