Subterranean Turbo System Install
|
Assembly of the turbo begins by loosening and removing the compressor and turbine housing bolts (six each) with a 1/2-inch wrench. As you pull out each bolt, apply the supplied antiseize compound to the threads and turn each one back in until it is several turns away from being hand tight. Once done, rotate the compressor and turbine housings to make sure they swivel smoothly. The bolts were loosened to properly "clock" the housing, which is important in the exhaust pipe installation stage, but also necessary as the rest of the housing is installed. View Related Article
|
|
|
|