Installing A New Cat-Back Exhaust On A 2001 Trans Am - Shout it Out!
|
This is what your exhaust clamp shouldn't look like. This position may lead to debris being caught and dragged under the car, but we had no choice. Since the Corsa I-pipe has relief cuts on the sides, we had to adjust the clamp to cover them. Our Y-pipe had to be cut a little short so there was some open area exposed, and we didn't want to weld if we didn't have to. The provided Torca clamps work great. Put these on loose until you finish the positioning of the entire system. View Related Article
|
|
|
|