Pontiac GTO Wheel and Drag Bag Installation - Hookin' Up A Goat On A Budget
|
Once the machining is complete, the rim now wears a metric GTO bolt pattern and the proper chamfers for the lug nuts. The total cost of machining was $75.00 for the pair. In summary, a total of 1 inch of additional rim width was achieved. Whereas the GTO rim carried a 48mm offset on the 8-inch rim, the WS6 was marginally different at 50mm. Without getting into fancy offset calculations, suffice it to say that the wider wheel effectively allowed the tire to stay in relatively the same center in the wheelwell, yet add 11/42-inch of width on the inboard and outboard sides of the wheel. View Related Article
|
|
|
|