Pontiac GTO Wheel and Drag Bag Installation - Hookin' Up A Goat On A Budget
|
After routing the air line along the frame rails of the fuel tank mounting bracket, a hose clamp is used to secure the Schrader valve to the line. The Schrader valve is then slipped through the hole, the washers and jam nuts are placed on the valve, tand hen tightened to the mounting bracket with a 13mm socket and wrench. Finally, the trunk is cleaned up, and the spare tire cover is installed, followed by the rear trunk liner. In order to allow access to the Schrader valve, a small piece of the trunk liner will be trimmed. View Related Article
|
|
|
|