Installing A Mass-Flo EFI System - New-Age SD-455
|
A GM 85mm LS6 MAF is custom-machined by Mass-Flo to mount on the throttle-body. The opening for the Q-Jet's airhorn in the air cleaner base had to be modified slightly to accept the MAF and adapter ring, but the factory hole for the Q-jet's vent provided an easy way to route the wires. The MAF mounting area was then sealed with silicone so no air would bypass it. With EFI, all of the air the engine breathes needs to go through the MAF sensor so the proper amount of fuel can be delivered. View Related Article
|
|