LS2 Intake Manifold Porting - LS2 Stealth Mods
For illustration purposes, an LS7 manifold that was already "separated" will be used. Other than having rectangular ports and a slightly revised port volume for the LS7 engine, the LS7 intake is constructed using the same technology as the LS2. The lower section is in the center, the center section is on the left, and on the right sits the upper section. The center section sits in the lower, and the upper section fits over and around the other two sections. Only the junction between the upper and the lower sections is vibration welded, thus the center section is "clamped" between them.
View Related Article
|
|