High Performance Pontiac Homepage High Performance Pontiac
Facebook Click here to find out more!

LS2 Intake Manifold Porting Ported Throttle Body

Prev  Next
LS2 Intake Manifold Porting Ported Throttle Body
LS2 Intake Manifold Porting - LS2 Stealth Mods
The Shaner S2 throttle body was swapped in place of the stock throttle body in minutes and, after allowing a sufficient cool-down period, the GTO was cranked back up on the chassis dyno. When complete, the throttle body netted a 3 hp peak increase but, more importantly, average horsepower and torque followed throughout the entire rpm range. Peak horsepower was 351.7 (+3), torque 353 lb-ft and the averages were 328.9 hp (+2.4) and 337.2 lb-ft (+2.5). The correction factor was 1.06. View Related Article
LS2 Intake Manifold Porting Pontiac GTO Engine Bay LS2 Intake Manifold Porting LS6 Intake Manifold LS2 Intake Manifold Porting LS2 Intake Manifold LS2 Intake Manifold Porting Three Piece LS7 Intake LS2 Intake Manifold Porting 90Mm Throttle Body Opening LS2 Intake Manifold Porting Sealing Surface LS2 Intake Manifold Porting Lower Plenum
LS2 Intake Manifold Porting Upper Plenum LS2 Intake Manifold Porting Upper Plenum LS2 Intake Manifold Porting Seam LS2 Intake Manifold Porting Porting LS2 Intake Manifold Porting Intake Port LS2 Intake Manifold Porting Port Volume LS2 Intake Manifold Porting Throttle Body Opening
LS2 Intake Manifold Porting Throttle Body LS2 Intake Manifold Porting Ported Throttle Body LS2 Intake Manifold Porting Baseline LS2 Intake Manifold Porting Ported Throttle Body LS2 Intake Manifold Porting Fuel Rails LS2 Intake Manifold Porting Ported Manifold LS2 Intake Manifold Porting Ported Manifold And Throttle Body
LS2 Intake Manifold Porting Comparison
Get Adobe Flash player
High Performance Pontiac