High Performance Pontiac Homepage High Performance Pontiac

Bore Spacing

Prev  Next
Bore Spacing
KRE MR-1 Block and High-Port Heads Build - Big-Inch Bracket Bruiser - Pontiac Tech
The block retained the bore spacing, cooling passages, mount holes, proper oil-pan-to-frame clearance, and the ability to accept all stock Pontiac engine pieces, right down to the press-in freeze plugs and timing cover from the stocker. The MR-1 is available with 3.00-inch mains or 3.25-inch mains and the cost is $2,695. Cam tunnel diameters of 50 and 55 mm are available optionally. The block shown has 3.00-inch mains and received a 4.350-inch bore and hone with a torque plate. View Related Article
Engine Mr 1 Block Bore Spacing Lighter Aluminum Ohio Crankshaft Grp 5100 Install Pistons
Laser Cut Cam Dial Indicators Timing Chain Cam Degreed Rod Cap Oiling System Oil Pump
Oil Pan Port Heads Tip Scraper Gaskets Intake Valvetrain Flying Toilet
Front Engine Adjust Valves Ere Oil Filter Bypass Kit Billet Distributor Rear Main Seal
Pontiac Solstice Research
Pontiac Solstice Get updated on all your car buying needs from safety features, to specs, to crash test ratings and options. Get all the information you need if you are interested in buying a new car like the Pontiac Solstice. The L4 standard engine in the Solstice gives you 173 horsepower with an estimated 22 mpg. It has a comparable trade in value which should come in handy when you go to shop for your next car. The Pontiac Torrent and the Pontiac G6 are other vehicles that might interest you.
Get Adobe Flash player