2000 Trans Am WS6 - LS1 Power Plan - Pontiac Tech
|
After removing the aftermarket strut-tower brace from the engine compartment to allow valve cover removal, the first task is to disconnect the coil pack harness, along with the fuel line to fuel rail connection on the driver side. Once accomplished, the MSD 8.5mm plug wires are removed from the ends of the coils and a 10mm socket is used to free the coil packs from the rocker cover. The coil packs are then taken from the passenger side, along with the dipstick tube. For '98-'00 LS1-equipped Birds, the AIR tubes that connect to the exhaust manifold or headers are then removed from both sides. View Related Article
|
|
|
|