2000 Trans Am WS6 - LS1 Power Plan - Pontiac Tech
|
The valvesprings will be removed using an LS-series in-car valvespring removal tool. Rather than pulling the heads to change the springs, the tool-in combination with a special air fitting-will thread into the spark plug hole, and keep the valves from falling down onto the pistons once the air line is pressurized and the valvespring is removed. The tool accepts a 3/8-inch socket fitting on both sides to provide leverage to compress the spring. Not included with the tool, but necessary to change the springs, are a 3/8-inch socket (1/2-inch breaker bar optional), the air fitting, and two long rocker bolts. View Related Article
|
|
|
|