Pontiac Muncie Transmission Rebuild Part One - Muncie Makeover
|
Using a 3/4-inch diameter metal dowel and the hydraulic press, Carson removes the Countershaft gear pin by applying pressure from front to rear. This allows removal of the Countershaft gear, its 112 needle bearings, and its thrust washers, as well as the front Reverse idler gear and its thrust washers. All parts are then set into the parts washer for a thorough cleaning. (The main Drive gear and its bearing were already removed from the main case in this photo.) Carson will reassemble the trans in Part II. View Related Article
|
|
|
|