Texas Speed LS1 Cylinder Head Upgrade - Big Power, Small Change - Part 1
|
Once both heads are installed, the Comp Hi-Tech pushrods are placed in the valve lifter sockets and the pedestal rail and rocker arms are reinstalled. A light coating of engine oil is placed on the rocker arms, then each rocker is torqued to 22 lb-ft. The valve rocker arm cover gasket is examined and replaced if it shows any signs of wear. In this case, the gasket was in good shape so the rocker cover will be installed and the four 8mm bolts torqued to 106 lb/in. View Related Article
|
|
|
|