Chassis Guide Jim Meyer Subframe
Jim Meyer Racing Products
(541) 994-7717
www.jimmeyerracing.com
Product:
Subframe
Fits the Following Models:
'67-'81 Trans Ams and Firebirds
'70-'81 Trans Ams and Firebirds
Features:
2x4-inch box-tube construction with tubular structural supports
Upper A-arms 1x.156-inch wall drawn over mandrel (DOM) tubing
Lower A-arms 1.25x.156-inch wall
DOM tubing
GM balljoints upper and lower11-inch GM disc brakes
Up to a 10-inch wheel/tire width
Adjustable stance up to 4 inches
Adjustable 1-inch-diameter sway bar
Adjustable trans mount with multihole bracket for MOST all GM and Tremec transmissions
Manual rack-and-pinion steering 3/4-inch-diameter lower A-arm shafts made from nickel-plated 1018 steel in a bronze bushing
Low road vibration 90-durometer urethane bushings
Aluminum coilover shocks
Benefits:
Direct bolt-in, uses all factory holes, body mounts, core support, bumper bracket mounts, engine/trans mounts in stock location
The only adjustable stance IFS in the industry
Camber, caster, toe-in, toe-out, alignment-friendly Superior handling, stopping, and steering
Lower stance and wider tire capabilities increase cornering adhesion
Quicker steering ratio than stock GM box
All parts available separately
Options and Upgrades:
Baer or Wilwood disc brakes
Vented and ball-milled rotors
Adjustable coilover shocks
Air Ride Technologies Shockwave Bags
Different coilover shock spring rates available Power rack Engines
Accepted:
Pontiac 326-455
LS-series
Mods Required:
Two steering U-joints and a length of double-D Shaft
MSRP
$6,800 unassembled View Related Article
|
|
|
|