1969 Pontiac Firebird Convertible - Eye Kandy
|
When removing the masking products, Patrick is careful to pull the tape in the opposite direction of its application to avoid pulling the paint up along the edge. (This photo is a mockup to show you how the car was taped for the red stripe. However, the -inch fine-line tape shown should be two pieces of 1/8-inch fine-line tape butted up to one another. The shop happened to be out of 1/8-inch tape at the time.) Next, Patrick will apply three coats of Kosmic Urethane Flo-Klear over the body and graphics, making sure there is plenty of material on the Bird, as some of it will be removed during wet-sanding and polishing. View Related Article
|
|
|
|