2005 Pontiac GTO Intake Manifold and Throttle Body - Breathing Room
|
Check out the area around his thumb in the ported runner. Fasterproms meticulously removed what is needed to increase power potential without degrading build quality or loosing velocity. What can't be seen in these photos is the amount of smoothing that was performed inside. "Since these are three-piece friction-welded manifolds, each one is different and none of them mate together perfectly,' Jeremy states. "We have gone inside and made sure that everything is smooth. There are certain parts to the manifold that we don't touch because of cost effectiveness. We only do what we can reach. In a FAST intake, we can take it apart and do the inside thoroughly. Because of this, we spend about three times more labor on a FAST than we do on an LS2. View Related Article
|
|
|
|