Global West
(877) 470-2975
www.globalwest.net
Suspension Kits Manufactured
G-Plus: Performance street handling packages for street performance, aggressive street, autocross, or pro-touring.
Category 5 Negative Roll Suspension Systems: Street and road racing components
Builder kits: Show car packages
Fits the Following Applications
'67-'69 or '70-'81 Firebird
Features
G-Plus Packages:
Tubular control arms, fully assembled
Del-a-lum bushings with a limited lifetime warranty
Sway bars (1 or 1 1/8-inch front), shocks, springs, coilovers subframe connectors, body-mount bushings, brakes, and steering
Category 5 Negative Roll Systems:
Tubular control arms fully assembled that induce negative camber gain
Sway bars (1-inch front, 5/8 or 3/4-inch rear), shocks, springs (500 to 800-pound front, 150-pound rear), coilover, subframe connectors, body-mount bushings, CAT 5 brakes, steering, leaf springs, and shackle kits
Builder Kits
Unassembled, non-coated tubular arm kits for show car builders
Benefits
G-Plus
Custom selection of performance components that are tailored to the needs of the enthusiast.
Upper control arms specifically reduce bump steer on '67-'69 models.
Options range from minor upgrades to autocross and anything in between.
Category 5
Negative Camber gain system keeps the tire flatter on the pavement than conventional geometry.
Used for road racing and serious street handling.
Comes complete with steering components for corrected bumpsteer.
A road racing front brake is standard with the package with choices from 11.75-inch diameter rotors to 13-inch depending on the wheels.
A unique bearing system is used in the rear leafs to remove the rising rate rear generally associated with leaf springs and increase corner exit traction.
Various options are available with the system.
Builder Kits
Builder kits are sold only to shops with proper equipment. (Builder kits are for show car and specialty project car builders.)
Control arms are unassembled and shipped bare to reduce the cost to the car builder from disassembly and stripping the coating off the components; reduces time lost on the project.
Mods Required
No modifications are required unless a subframe is installed: The subframe will require welding.
MSRP
$500-$9,700 based on options and the system chosen