Control Arm Bushing Swap - Get In Control
|
We tightened the upper and lower ball joint nuts using 3/4- and 7/8-inch wrenches, respectively. Ultimately, we'll torque the upper nut to at least 50 ft-lb, while the lower nut gets 90 ft-lb. You might find in either instance that the castellated nut slots don't align with the ball-joint stud's cotter pin hole. If that's the case, don't back the nut off--continue tightening instead. Maximum torque shouldn't exceed 80 ft-lb for the upper nut or 120 ft-lb for the lower. View Related Article
|
|
|
|