BMR Fabrication
(813) 986-9302
www.bmrfabrication.com
Suspension Kits Manufactured
Handling Performance Package Level 1 ('64-'67, '68-'72)
Handling Performance Package Level 2 ('64-'67, '68-'72)
Features
Handling Performance Package Level 1
* Front and rear 1-in lowering springs cold-wound from high-tensile-strength chrome-silicon-vanadium steel to provide the most long-lasting, consistent rate possible with minimal "memory loss"
* Front spring rate is 520 lb/in; rear spring rate is 200 lb/in
* Front and rear HD sway bars cold-formed from 1.25-inch and 1-inch solid-steel bar stock respectively; provided with polyurethane mounting bushings, endlinks, and Grade 8 mounting hardware, and powdercoated in red or black hammertone finishes
* Bilstein front and rear rising rate, self-adjusting monotube shock absorbers
Handling Performance Package Level 2
* All of the Handling Performance Package Level 1 components plus:
* BMR tubular upper and lower front A-arms manufactured from MIG-welded DOM tubing and assembled with low deflection, internally-fluted polyurethane bushings
* Upper A-arms come assembled with new billet-steel cross-shafts, ball joints, and bumpstops
* Upper and lower rear control arms are assembled with low deflection, internally-fluted polyurethane bushings
* Lower control arms are a boxed design, fabricated from 1.5x3.0-inch rectangular steel tubing, while the upper control arms are manufactured from 1.625x0.120-inch wall DOM tubing
* The upper control arms allow on-car pinion-angle adjustment thanks to a 1.125-inch diameter adjuster
* Control arm reinforcement braces add stiffness by tying the upper control arm mounting points to the lower control arm mounting points
Benefits According to the Manufacturer
* Components are matched and developed to work together
* Simple installation that can easily be done by the average enthusiast in the driveway with normal hand tools
* Low-cost installation if performed by a professional shop
* Average install time is 3-4 hours for Handling Performance Package Level 1 and 6-8 hours for Handling Performance Package Level 2
* All components proudly made in the USA
Options and Upgrades
* Color-Available in red or black hammertone; no charge for powdercoating
* No upgrades necessary; this kit already includes all the best components
Mods Required
* None, all components bolt onto vehicle using existing mounting holes
* This suspension kit can be removed in the future if the owner wants to put the car back to stock
MSRP
Level 1: $949
Level 2: $2,099
Edelbrock Corporation
(310) 781-2222
www.edelbrock.com/suspension
Suspension Kits Manufactured
Touring Kit
Pro-Touring Kit
Fits the Following Models
LeMans, GTO, Tempest
Features
Touring Kit:
* Lower trailing arms
* Adjustable upper arms
* Adjustable frame braces
* Front (hollow-core 1.25-inch) and rear (solid-core 1-inch) sway bars
* All of the necessary hardware and installation instructions
Pro-Touring Kit:
* Everything in the Touring plus:
* Adjustable frame braces
* IAS Shocks
* Spring set (lowers car 1.3 inches front and back) (rates unavailable)
* Tie rods
Benefits According to the Manufacturer
Touring Kit:
* Best combination of components needed to upgrade your stock suspension
* Entry level and most economical upgrade in Edelbrock's line of kits
* Tailored for each vehicle-specific application
* Uses the stock mounting locations for a simple install
Pro-Touring Kit:
* Ultimate upgrade for your Pontiac's suspension in one box
* Help plant your car's power on the pavement
* Custom-tailored for each application in order to provide the right combination to improve handling and reaction to road conditions
* Uses the stock mounting locations for a simple install
Options and Upgrades
None available at this time
Mods Required
Touring Kit ('64-'67) Adjustable upper arms may require purchase of new differential bushings
Pro-Touring Kits ('64-'66, '67)Adjustable upper arms may require purchase of new differential bushings
MSRP
$989-$1,750 (Contact the company for specific application pricing)