Luhn Performance has designed custom supercharger-bracket kits that provide a firm mounting location to install a Vortech or ATI ProCharger setup on a traditional Pontiac engine. According to the company, they're made from 6061 aluminum, can be used with power steering and A/C, and have no vehicle restrictions. The price is $1,000 for the Vortech brackets (which uses a serpentine system) and $750 for the ProCharger (which utilizes a cog drive). Luhn Performance; (414) 762-2220;
www.luhnperformance.com.
Ames Performance Engineering introduces its reproduction of the '65/'66 die-cast Console Top Plate Assembly and '67 die-cast Top Plate Assembly for the GTO, LeMans, and Tempest. They come complete with the top-plate assembly, shifter bezel, console box bezel, and console door-including screws and hinges. Unlike previous aftermarket reproductions that were made of plastic, these items are die-cast. For the '65/'66 application, use Ames Performance part number A274WR, which retails for $649. For '67, use part number A274WS at $629. Ames Performance Engineering; (800) 421-2637;
www.amesperf.com.
Zex introduces its custom-fit nitrous system for the '08 and '09 G8 GT and '09 GXP. Using the company's patented Zex Active Fuel Control module, which adjusts fuel enrichment based on bottle pressure, this system is one of the most sophisticated wet nitrous kits on the market, and it's engineered to be completely compatible with the complex OE throttle-by-wire electronic throttle body. This system also incorporates an electronic throttle-position-sensor switch for consistent and button-free wide-open-throttle actuation, and a nitrous-management-unit bracket for quick and easy engine-bay mounting. Zex claims it will add 75-175 hp to your G8 and takes approximately two hours to install. The price is $575. Zex; (888) 817-1008;
www.zex.com.
Nitemare Performance announces its new Pro Sleeved and Hardened Oil Pump Driveshaft for your Pontiac. Made from heat-treated high-carbon steel with a Rockwell hardness of 28-32, each of its contact ends are induction-hardened to a Rockwell hardness of 43-47. Then a custom-honed sleeve is pressed onto the oil-pump end of the driveshaft, and a solid dowel pin is employed to further secure it. For $50, you can add durability to your oiling system. Nitemare Performance; (203) 239-6868;
www.nitemareperformance.com.
Butler Performance has released new, direct-replacement solid engine mounts for the '75-'79 Firebirds, Trans Ams, and Formulas. They provide a solid connection to the chassis, are ideal for high-horsepower engines, and will eliminate the engine's tendency to torque over during hard acceleration. The price is $80. Butler Performance; (931) 762-4596;
www.butlerperformance.com.