High Performance Pontiac Homepage High Performance Pontiac
Facebook Click here to find out more!

Pontiac Long Tube Headers Air Line

Prev  Next
 
Pontiac Long Tube Headers Air Line
Pontiac Long Tube Headers Air Line
An air line was attached to the fitting on the collector block-off plate, and the air pressure was regulated at the compressor to approximately 15 psi. The entire header was then inspected for any leaks. View Related Article
Pontiac Long Tube Headers Mock Up Pontiac Long Tube Headers Passenger Header Pontiac Long Tube Headers Driver Side Pontiac Long Tube Headers Plywood Pontiac Long Tube Headers Header Gasket Pontiac Long Tube Headers Cut Plywood Pontiac Long Tube Headers Drilled Holes
Pontiac Long Tube Headers Metal Block Off Plate Pontiac Long Tube Headers Belt Sander Pontiac Long Tube Headers Sliced In Half Pontiac Long Tube Headers Ready For Installation Pontiac Long Tube Headers Bolts Fastened Pontiac Long Tube Headers C Clamps Pontiac Long Tube Headers Block Off Plate
Pontiac Long Tube Headers Air Gauge Pontiac Long Tube Headers Teflon Tape Pontiac Long Tube Headers Plate Installed Pontiac Long Tube Headers Air Line Pontiac Long Tube Headers Gas Torch Pontiac Long Tube Headers Required 45 Psi Pontiac Long Tube Headers Adjusting Torch
Pontiac Long Tube Headers Pushed Out Pontiac Long Tube Headers Work Continued Pontiac Long Tube Headers Welded With Torch Pontiac Long Tube Headers Repair Both Headers Pontiac Long Tube Headers Preparation For Welding
Get Adobe Flash player
High Performance Pontiac