Msd Distributor Install Jumper Wire.JPG
|
We created a second jumper wire
to connect the Ready-To-Runs
gray tach wire and our Firebird's existing
tachometer lead. It, too, used male-spade
connectors, one of which was inserted
into the tach lead and wrapped with black
tape. A second jumper wire is required
to set the rev limiter while watching the
tach. When momentarily grounded, it
allows the operator to quickly and easily
set and/or adjust the distributor's inter-
nal rev-limiter. View Related Article
|
|
|
|